• Levering: 1-3 hverdage
  • Bestil inden kl. 14.00 - så sender vi samme hverdag
  • Billig fragt - fra 0,-

Bakkamera Interface til PSA (SMEG)

Bakkamera Interface til PSA (SMEG)

3.699,00 DKK

(inkl. moms)

Vejl. udsalgspris 3.699,00 DKK (inkl. moms)

stk.

Model/Varenr.: 27-559
Lagerstatus: På lager

This interface allows you to add a rear and front camera to the OEM monitor of Peugeot and Citroen cars with SMEG navigation screens. It adds active parking lines and integrates with the cars parking sensors to provide a visual parking display.

No special coding is needed as the interface integrates with the LVDS cable behind the vehicle head unit. The rear camera will activate as soon as reverse gear is engaged. The front camera will only activate if reverse gear is selected and then immediately afterwards drive forward gear is selected. The interface has a feature to allow manual activation of the front camera, this is done by pressing and holding the LIST button on the steering wheel, this feature also allows the front camera input to be used as a general video input for DVD and other video devices.

Passer på:

Peugeot 208 (2013 - 2016)

Peugeot 2008 (2013 - 2016)

Peugeot 308 (2013 - 2016)

Peugeot 408 (2013 - 2016)

Peugeot 508 (2014 - 2016)

Citroen C3 2013 >

Citroen C4 2013>

Citroen C5 2013>

Bemærk:

Fremtidige ændringer/opdateringer af køretøjets software kan forårsage funktionsfejl i interfacet.

Det kan muligvis klares ved en softwareopdatering af interfacet men det kan vi ikke garantere.

En evt. opdatering koster 500,- og interfacet skal indsendes for egen regning. Arbejdsomkostninger for og andre udgifter forbundet med softwareopdateringerne refunderes ikke.

Derfor anbefales det ikke at opdatere bilens multimedie system.

Installation

Ignition must be turned off before installing the interface.The plug and play quadlock harness is connected behind the car's original radio.

Set the dip switches on the unit first before powering the interface. If changing the dip switches you must power down the interface first.

On manual cars you may need to connect a cable from the interface to a reverse trigger wire such as the reverse light feed.

 

WHAT IS SMEG?

SMEG is one of Peugeot's factory fitted navigation systems. Also identified as SMEG/ SMEG+/ DS Connect Nav Touch, the system features a 7 inch touch screen monitor with a 4pin HSD LVDS standard quadlock.

Monterings vejledning: 27-559

Kunder der har købt dette produkt har også købt