Med dette bakkamera interface kan der monteres et eftermarkeds bakkamera på OE radioen i Citroen, Peugeot og Toyota biler med X-Touch/ X-Nav system.
Passer på:
Citroen C1 (2014 ->)
Peugeot 108 (2014 ->)
Toyota Aygo (2014 ->)
Bemærk:
Fremtidige ændringer/opdateringer af køretøjets software kan forårsage funktionsfejl i interfacet.
Det kan muligvis klares ved en softwareopdatering af interfacet men det kan vi ikke garantere.
En evt. opdatering koster 500,- og interfacet skal indsendes for egen regning. Arbejdsomkostninger for og andre udgifter forbundet med softwareopdateringerne refunderes ikke.
Derfor anbefales det ikke at opdatere bilens multimedie system.
NB: Kun til biler med X-Touch/ X-Nav radio enhed.
Vær opmærksom på:
- Power of the additionally installed rear view camera should be taken from the ACC line (first key turn) otherwise camera input will not be active.
Nothing need to be set-up just installed correctly and the steps followed to make sure the car is aware of the camera and knows to display it
- Supporter kun NTSC kamera
1. Ensure the vehicle’s ignition is off and the key has been removed.
2. Remove the standard Head Unit with reference to the manufacturer’s instructions.
3. Disconnect the 8-pin from the rear of the Head Unit. And Connect the 8-pin female connector of 27-226 to the connector just removed from the Head Unit.
4. Connect the male 8-pin of 27-226 connector to the Head Unit.
5. Only connect the red and black 6V wires if the camera being using needs an 6V power supply. The camera being used is a 12V camera an alternative ignition live; fused power supply will need to be used.
6. Test the camera fully before re-installing the Head Unit
Kunder der har købt dette produkt har også købt
