Levering: 1-3 hverdage
Bestil inden kl. 14.00 - så sender vi samme hverdag
Billig fragt - fra 0,-

Bakkamera Interface til Alfa, Fiat, Jeep med flere

5.453,03 SEK

(inkl. moms)

Vejl. udsalgspris 5.453,03 SEK (inkl. moms)

stk.

Model/Varenr.: NA-RL4UCON7500

Lagerstatus: På lager

Beskrivelse
Specifikationer

r.LiNK video inserter for rear-view camera, front camera with auto switching and 2 video-sources. Compatible with Fiat 500 from MY2017, 500L and 500X from MY2018 with Uconnect 7inch LIVE HD and Nav LIVE HD and Jeep vehicles from MY2018 with Uconnect Multimediasystem with 7inch monitor.

The r.LiNK interface allows to insert a rear-view camera, a front camera with auto switching and two additional video sources (e.g. USB-player, DVB-T2 tuner, ...) to the factory-infotainment system of the vehicle manufacturer.

Product features

Video-inserter for factory-infotainment systems
1 CVBS rear-view camera video-input
1 CVBS front camera video-input
2 CVBS video-inputs for after-market devices (e.g. USB-Player, DVB-T2 tuner, ...)
Automatic switching to rear-view camera input on engagement of the reverse gear
Automatic front camera switching after reverse gear for 10 seconds
Video-in-motion (ONLY for connected video-sources)
Video-inputs PAL and NTSC compatible

NB.: Der kan kun tilsluttes PAL og NTSC kamera til dette interface, IKKE AHD

Bemærk:

Fremtidige ændringer/opdateringer af køretøjets software kan forårsage funktionsfejl i interfacet.

Det kan muligvis klares ved en softwareopdatering af interfacet men det kan vi ikke garantere.

En evt. opdatering koster 500,- og interfacet skal indsendes for egen regning. Arbejdsomkostninger for og andre udgifter forbundet med softwareopdateringerne refunderes ikke.

Derfor anbefales det ikke at opdatere bilens multimedie system.

Bemærk, dette er en skaffe vare med forlænget leveringstid og der ydes ikke returret på bestillingsvarer/skaffevarer, dvs varer som ikke er lagervarer og som hjemtages specifikt til en ordre.

Derfor venligst sikre dig at det er den rigtige vare til din bil.

©au2Tek.dk2021

Compatibility

Brand	Model	Navigation
Alfa Romeo	Giulietta (940) facelift 2013 from 08/2013 til 03/2016, MiTo from about 2014	Uconnect 5 VP2/RA2 with DIN-shell behind front-panel*
Citroen	Jumper2 (X250/X290)from 05/2014 til model year 2023, Relay2 from 05/2014 til model year 2023	Uconnect 5 VP2/RA2 with DIN-shell behind front-panel*
Dodge	RAM 1500/2500/3500 model years 2013-2018 and other vehicles with	Uconnect 5 VP2/RA2 with DIN-shell behind front-panel*
Fiat	500, 500L, Doblo, Ducato3 (250/251/X290) from 06/2016 til model year 2020, Tipo and other vehicles with	Uconnect VP2/RA2, 5inch monitor with DIN-shell behind front-panel*
Jeep	Renegade model year from 2014	Uconnect Fiat 520 VP2 with 5inch monitor, All-in-One WITH DIN-shell behind front-panel*
Opel	Movano C from 05/2021 til model year 2023	Uconnect VP2/RA2, 5inch monitor DIN-shell behind front-panel*
Peugeot	Boxer2 (X250/X290) from model year 2012 til model year 2023	Uconnect VP2/RA2, 5inch monitor DIN-shell behind front-panel*

*Note: Units with a CD drive always have a DIN-shell behind the head unit's front-panel. Units without a CD drive are available with and without a DIN-shell. For units without DIN-shell, the RL4-UCON5-CP is the suitable interface.

Limitations

Video only	The interface inserts ONLY video signals into the infotainment. For inserting Audio signals either the possibly existing factory audio-AUX-input or a FM-modulator can be used. If 2 audio sources shall be connected to the infotainment, an additional electronic is necessary to switch them.
Factory rear-view camera	Automatically switching-back from inserted video to factory rear-view camera is only possible while the reverse gear is engaged. To delay the switch-back an additional electronic part is required.
After market front camera	The front camera will automatically be switched for 10 seconds after disengaging the reverse gear. A manually front camera switching is possible by external keypad.

NOTICE: The interface have to be installed in the monitor panel (the cover needs to be opened)!

Connectors

Video-insertion: ribbon cable
Power and CAN-bus: open cable ends
Video-input (2x): RCA female connector
Rear-view camera-input: RCA female connector
Front camera-input: RCA female connector

Specifications

Operating voltage	12V DC (7~25V)
Standby current	0mA
Current consumption	140mA
Video input	0.7~1V
Video input formats	PAL/NTSC
Operating temperature	-40°C to +85°C
Dimensions video-box	117 x 25 x 90mm (W x H x D)